Chevrolet Volt Concept

Chevrolet Volt is scheduled to launch on 2011, this cool car is able to travel 40 miles on a single charge without using any gasoline or emissions. Chevrolet Volt also has an electric motor powered by a 1.4-liter four-cylinder flex-fuel engine as a backup, this motor will take over when the car goes beyond the 40 mile range.

Chevrolet Volt concept has a sophisticated design, the design and engineering is a result from collaboration between GM designer and GE Plastics. Their technology make the exterior appearance of the Volt become more bold and futuristic. The Interior of this concept car is ergonomic and futuristic.

Chevrolet Volt Concept Specifications :

Dimensions :

Length ; Width ; Height : 4,318 [mm] ; 1,791 [mm] ; 1,336 [mm]

Front and Rear Tracks : 64 inches / 163 mm

Body style / driveline: 4-5-passenger sedan, unitized frame, electric propulsion, front wheel drive

Construction: body-frame-integral structure with composite exterior panels and roof

Drive System :

Description : electrically driven system with on board range extender, plug-in recharge capability

Type : lithium-ion

Energy : 16 kWh (minimum)

Peak power : 130 to 140 kW

Voltage : 320 to 350

100% Recharge 110-volt outlet : 6 to 6.5 hours

Max. electrical power : 130 to 140 kW

Max. mechanical power : 120 kW

Continuous electrical power : 45 kW

Continuous mechanical power : 40 kW

Power : 53 kW peak power

Drive : direct

Type : 3-cylinder, turbocharged engine

Size : 1L

Fuel : gas or E85

Nominal speed : 1500 to 1800 rpm

Max speed : 3200 rpm

Fuel tank (gal / L) : 12 / 54.5

Type : plug-in

Voltage / amp : 110 / 15

Horsepower (hp / kW) : 160 / 120

Torque (lb-ft / Nm) : 236 / 320

Electric mode range : 40 miles – full electric vehicle (EV) range

Estimated fuel economy @ constant state of charge : 50 mpg during charge sustaining operation

0 to 60 mph : 8 to 8.5 seconds

Top speed (mph) : 120 (limited duration)

Chassis/Suspension :

Front : independent, strut-type

Rear : semi-independent torsion beam

Steering type : electric, speed-sensitive, variable assist rack-and-pinion

Turning circle, curb-to-curb (ft / m) : 37 to 38 / 11.2 to 11.5

Brakes Type : electro-hydraulic power assisted; front disc, rear drum

Wheel size (in) : 21 x 6.5

Tires : 195/55R21, low-rolling resistance

Interior :

Seating capacity (front / rear) : 2 / 2

Pontiac Solstice SD-290

The inspiration of Pontiac Solstice SD-290 concept is coming from a vintage race car design. The design concept really capture the design of vintage race car and evoke the emotions of classic sport cars. The concept design has an old school look with a passenger cockpit tonneau cover and a driver windscreen, creating a pure race car looks.

Pontiac reduce the weight of the car, improved the aerodynamics and also redesigned the fender gill panels. They also created a new hood with heat-extracting grilles, a red paint scheme and cockpit filled with auxiliary gauges, a roll bar and racing seat.

This race car concept has direct-injected, turbocharged 2.0-liter Ecotec four-cylinder engine that produced 290 horse power, this is the reason they call it Pontiac Solstice SD-290.

Official Pontiac Solstice SD-290 Features Highlight from GM :

- 2.0L Ecotec direct-injected and turbocharged generating 290 horsepower

- Five-speed manual transmission

- Weight reduction through installation of driver-side only windscreen and elimination of door glass/hardware, convertible top/hardware, HVAC system and wiper system

- Solo Performance cat-back exhaust system with center-mounted outlet

- KW Automotive coil-over suspension package

- Three-piston aluminum calipers with 13-inch rotors from Stainless Steel Brake Company

- Forged 19-inch wheels with Hoosier R6 racing tires

- New front fascia, grille inserts, hood and front fenders, leading to better aerodynamics

- Passenger-side hard tonneau cover

- Competition red exterior color

- Rear spoiler

- Tinted headlamp lenses

- Removable racing-style steering wheel

- Racing seat with four-point safety harness

- Chrome fire extinguisher

- Pegasus center console gauge package

- Driver's roll bar

Pontiac Solstice SD-290 Specifications :

General Specifications :

Country Of Origin : United States

Introduced at : 2007 SEMA Show

Engine :

Configuration : 2 liter Ecotec i-4

Engine Location : Front, longitudinally mounted

Powertrain Layout : Rear Wheel

Displacement : 2.00 L | 122 cu in. | 1999.6 cc.

Construction : cast-aluminum block and head

Displacement : 1.998 liter / 121.9 cu in

Bore / Stroke : 86.0 mm (3.4 in) / 86.0 mm (3.4 in)

Compression : 9.2:1

Valvetrain : 4 valves / cylinder, DOHC

Fuel feed : Direct Fuel Injection

Aspiration : Turbo

Drive Train :

Gearbox Transmission : 5 speed Manual

Drive : Rear wheel drive

Performance :

Power : 290 bhp / 216 KW

BHP / Liter : 145 BHP / Liter

Lumeneo Smera

Lumeneo Smera was introduced at the 2008 Geneva Motor Show. With 144 volt lithium ion battery Lumeneo Smera can go from 0-60mph in eight seconds. The lithium ion battery is supplying the power to the dual rear wheel motors. This concept car is able to transport two passenger up to 93 miles and with 80 mph of top speed. In 2009 Lumeneo plan to produce 250 units of this cool car. The price range is starting at 24,500 euros ($33,000 US).

General Specifications :

First Introduced at : 2008 Geneva Motor Show

Country of origin : France

Dimensions :

Length / width / height : 2380 / 800 / 1450 mm

Doors / Seats : 2 / 1+1

Wheelbase : 1700 mm

Track : 655 mm

Steering diameter : 7 m

Maximum tilting angle : 25 °

Weight (with batteries) : 350kg / 770 lbs

Pneumatic dimensions : 145/70 R14

Engine :

Boot volume : 70 / 150 liters

Motorization Technology : Brushless electric motors with permanent magnets

Max Power : 30 / 40 kW / Hp

Max Torque on wheels : 1 000 Nm

Max Voltage : 144 V

Technology : Lithium

Capacity : 10 kWh

Battery weight : 80 kg / 180 lbs

Speed :

Performances Max speed : 130 kph / 80 mph

0-100 kph / 0 – 60 mph : 8.0 s

Range : 150 km / 90 miles

Opel Flextreme Concept

Opel Flextreme Concept was introduced at the International Motor Show (IAA) in Frankfurt in 2007. This cool car has a low emission mobility propulsion with the E Flex technology. The flextreme concept has a lithium ion battery as it’s energy source, this car also has additional energy from 1.3 liter turbo-diesel onboard CDTI engine. This innovative vehicle is expected to emit less than 40 g of CO2 per km. After charging for three hours at 220 volts this car will be at it’s full capacity. The engine also include the integration of two high tech electric personal transporters, located below the cargo floor. This electric transporters provide extra mobility option up to 38 km of clean mobility.

Opel Flextreme Concept has a dynamic and innovative exterior and interior design. Flextreme has a large transparent roof and two tailgate doors that open from the side and swing upwards it also has narrow boomerang shaped lights and sloping swage line in the side graphics. The front part is decorated with front grill and rims which are covered by lightweight transparent trim made from polycarbonate to improve aerodynamics and enhancing visual aesthetics. This concept car has a unique and practical door which they call the FlexDoors, the front door open in the conventional manner and the rear door are rear hinged.

Flextreme Concept has a futuristic interior design with honeycomb structures. The honeycomb structure is a functional, geometric structure located in the instrument panel’s lower portion, above the center tunnel where the lithium-ion batteries are located, cabin floor and cargo floor. This cool automotive has a large panoramic display located directly under the windshield and on the center console. The display are configurable with a touch screen operation to show a complete view of the car surrounding and easy access to various menu such as air conditioning, communication device, infotainment feature and navigation functions.

Peugeot 308 RC-Z

Peugeot 308 RC-Z concept was introduced at the Frankfurt show back in 2007 and it will be mass produced by May 2010. This cool car is a front-wheel drive vehicle equipped with a Mini Cooper JCW 1.6 turbo unit that able to provide 218bhp. The concept and the mass produced car has a slight differences in the headlight design and the exterior body curve.

The interior of this unique car has a sophisticated design and a polycarbonate roof with twin bubbles to increase headroom. The cockpit is trimmed in leather, chrome, aluminum and black-lacquered plastic.

This Peugeot concept car power is provided by the same 1.6-litre 163kW/218hp direct injection four cylinder that can be found in the Mini Cooper. Peugeot 308 RC-Z is relatively lightweight and should be capable of decent turn of speed.

Toyota A-BAT Concept

The Toyota A-BAT was on display at the Toyota exhibit in Detroit at the 2008 North American International Auto Show beginning Monday, January 14. Kevin Hunter, president, Calty Design Research, Inc said that "Driving from beyond the suburbs to the city is a way of life for many people. We've taken Toyota's truck heritage to a different level by envisioning a vehicle capable of manouvering the suburbs as well as dirt roads. This compact truck is as comfortable for long commutes as it is for road trips. It can accommodate outdoor toys and home improvement supplies. Plus, customers benefit from the hybrid powertrain's low emissions and fuel economy."

TMS Advanced Product Strategy group and Calty, Toyota's North American-based, research and design centre located in Newport Beach, California are the group that responsible for the A-BAT concept development. This team created a new genre of compact vehicle with good fuel economy, advanced functionality, manoeuvrability, unique styling within its segment, and a durable package suitable for an active lifestyle.

Beside the lightweight A-BAT concept package also coupled with Toyota's Hybrid Synergy Drive technology is designed to deliver excellent fuel economy. Translucent solar panels in the top surface of the instrument panel capture sunlight and convert it into energy, showcasing the vehicle's "green" character. Toyota A-BAT is an environmentally friendly cool truck.

This cool car has a unique aerodynamic exterior crafted by Calty Project Chief Designer Ian Cartabiano and Creative Designer Matt Sperling. They integrated Toyota's design philosophy, "Vibrant Clarity" into the exterior by keeping the design forward-looking, crisp and functional.

Although the A-BAT is rugged and has a spirited exterior, the interior team worked to create a modern look for the interior. The door trim, shoulder, armrest and instrument panel pads and seat cushions are made of a tough, lightweight and comfortable material that can be selected for personalization.

Daryl Harris, Senior Creative Designer said that "The inspiration behind the exposed structure on the interior was drawn from high-end mountain bike frames. "We applied lightweight construction materials, such as carbon fiber and aluminum, to the instrument panel, console and seats for increased structural rigidity while reducing mass."

The interior of this cool automotive has a retractable portable navigation unit with a seven-inch diagonal screen and Wi-Fi internet. It also includes other advanced features such as a port for portable device assistant synchronization and a hard drive for digital music. The Toyota A-Bat is the next evolution of compact truck.

The Hybrid Race Car : Toyota CS&S Concept

Toyota CS&S was introduced at the 2003 Frankfurt Motor Show in Germany. This hybrid race car concept was designed at the Toyota ED2 studio near Nice, France. CS&S stands for Compact Sports and Specialty. The CS&S is a 4-wheel-drive mid-engine 2+2 sports car powered by a 1.5 litre hybrid petrol electric set up taken directly from the Toyota Prius powers the rear wheels and a separate electric motor is connected to the front wheels.

This cool concept car Employing Toyota's Hybrid Synergy Drive, an electric motor drives the front wheels, while a gas engine and electric motor in combination drive the rear. CS&S also unveils "Toyota Space Touch," where the driver able to activated functions by touching holographic projections. This future automotive has a seating arrangement with removable covers for the rear 2 occasional seats, where the car can be run as a 2 seater or if the rear canopies are removed from behind the front seats, a 2+2 seater.

Spyker C8 Aileron 2009

Spyker Cars has introduced Spyker Aileron 2009 at the 2008 Geneva Motor Show, this cool automotive has 400Hp (298KW) Power and 300Km/h (187mph) Top speed. The exterior of this fast sport car has a rough and tough design line with a futuristic touch. With 4617mm length, 1972mm width, 1270mm height and 1425kg weight this cool car able to reach 0-100km/h (0-60mph) in just 4,5 second.

Spyker Cars is a premium sport cars manufacturer from Netherlands, they used the Audi 4.2 litre V8 engine for the Spyker C8 Aileron 2009. The exterior is made from aluminium body panels over aluminium spaceframe, creating a classic and contemporary looks at the same time.

The Interior of this luxurious sport car is using a vibrant color leather and also available in 14 standard colors for it’s seats and dashboard, the customer also has the option to choose other color option that they desired. The interior has a retro design, the highest quality leather cover and the metallic silver on dashboard design give a classical design touch to this super fast car.

Limited Bentley Zagato GTZ

Bentley Zagato GTZ was first introduced at the 78th Geneva International Motor show 2008 by Zagato Atelier. Bentley GTZ is a neo classic Zagato interpretation of the style of a British GT. This cool automotive project and concept was conceived at the Pebble Beach Concours D'Elegance in 2006 by Dr. Ing. Franz Josef Paefgen, CEO of Bentley Motors Limited and Dr. Andrea Zagato, President of Zagato.

This unique automotive is born from two great automotive cultures Bentley and Zagato. Bentley Zagato GTZ design team able to create a distinctive and attractive character to this cool car. The exterior of Bentley GTZ has a pronounced fender lines, a unique double bubble roof and a round tail with all new rear combination lamp. All element of this luxurious car are harmoniously integrated and created an aggressive, sharp and solid looks.

This limited production car interior has a refined and exclusive design with natural color of leather seats, The interior is styled by British firm Adaptive Space. This fast and limited edition car is valued at $1.7 million USD, and only 9 of this car is produced so far.

Pagani Zonda F

Pagani Zonda was first introduced at the 2006 Geneva Motor Show, the exterior body is designed by Horacio Pagani. There is only 27 Pagani Zonda F being produced. This super fast car is powered by 7.3 litre AMG V12 Mercedes Benz engine. Pagani says that this sport car will be the most expensive roadster in the world.

This limited roadster has 1230 kg weight, 4435 mm length, 2055 mm width and 1141 mm height. With 602 bhp power this luxurious automobile could reach 345 km/h / (214 mph) top speed. The interior of Pagani Zonda F is dominated by red, black and metallic touch. It has a unique interior design with red leather seats and retro style dashboard. This Super automotive is definitely an ultimate toys for the rich and famous people.